Instruction Manual for Plastic Beeswax Foundation Sheet

   Plastic nest foundations have been used in foreign countries for decades. To strengthen the backwardness of the use of plastic nest foundations in my country's beekeeping industry, some manufacturers have carefully researched and developed them for many years and combined with my country's national conditions. The successful development of high-quality, low-cost and high-strength plastic nest foundations has a price advantage that Chinese beekeepers can afford. One purchase will benefit lifelong. The standard plastic nest foundation has been used by a large number of bee farms at home and abroad. Fourteen plastic nest foundation records were made in the colony, containing honey and calving and the colony was strong, and the worker bees were large.

First. Plastic beeswax foundation sheet's advantages are:

1. The plastic nest foundation has good temperature resistance, no deformation and shrinkage, good tensile performance and long service life. There is no plastic injection head on the plastic nest foundation, which is 100% honeycomb, and can be used as an ordinary nest foundation. Overcome the fragile and falling spleen phenomenon of the new spleen shaken honey, join the bee colony at one time and put the distance away without checking every day, saving labor and time.

2. The plastic honeycomb base is unified and complete, and the worker bees born after acceptance are less likely to build male bees.

3. The wax can be melted frequently to achieve the purpose of disinfection. Repeated use and reconstruction of the new spleen is beneficial to control the bee division, cultivate individual strong worker bees, and lay a good foundation for raising a strong colony.

4. The plastic nest foundation can be waxed when the worker bees build and shake honey irregularly and use it for 2-3 years, and the flower wax is pure beeswax, which improves economic income.

5. Easy to install, no need to pull lead wire or inlay foundation, use the wooden nest frame slotted on the upper and lower beams, put it in the slot and use it.

6. The plastic nest foundation can be used for multiple purposes in one frame, and it can be used as a double king partition board during special periods.

Second, the use and installation

1. Use the wooden nest frame with the upper and lower beams slotted, and it can be used in the slot, but it must be left in a space around the nest foundation, about 2-3 mm.

2. For the first use of the new plastic nest foundation, it can be soaked in the water after the spleen of the old nest for one day and then dried for use. The acceptance rate is high. good.

3. Use the heated wax block to rub back and forth on the corners of the plastic nest foundation, or apply a small amount of honey first, then scrape a small amount of beeswax powder and sprinkle it on, the effect is better. Or use beeswax to boil the water in the pot, then quickly dip the plastic nest foundation in the pot and take it out immediately, the effect is particularly good.

4. Do not mix with wax nest foundation in early spring and late autumn. At this time, the concentrated use of plastic nest foundation is more effective than dispersed use, and the acceptance rate is high. Put the formed plastic spleen in a beehive, and then add a new plastic nest. basis, the acceptance rate is higher.

5. The plastic nest foundation is less acceptable in early spring and late autumn. Use the honey-flowing period to make a good spleen. Use a worm transfer needle to move several larvae on both sides and the center of the nest spleen to induce the queen bee to lay eggs on the nest spleen. It's normal.

6. The method of melting wax is simple, as long as the wax is directly melted in hot water of 80~100 °C, and the new spleen will not be deformed by adding it to the bee colony after melting the wax.

7. After three years, the old spleen can be waxed to obtain pure melittin, and the raw materials such as beeswax have no other pollution. The plastic nest foundation rebuilds a new spleen in the bee colony, which can be used repeatedly.

Italian bee standard type: 425mmⅩ212mm, the depth of the house foundation is about 1.8mm, and the length can be customized according to customer requirements. Zhongfeng standard type: 415mmX210mm, yellow, packing carton. Italian bee 200 pieces per box, Zhongfeng 240 pieces per box, 20 pieces per pouch, ex-factory price per piece: 2.20 yuan, at least 1 box, large quantity, preferential price, payment to delivery, freight at your own risk.